The artificial climate chamber is suitable for scientific research units such as sanitation and epidemic prevention, environmental protection, agriculture, forestry and animal husbandry. The laboratory and production department of the institute are dedicated to constant temperature and humidity, illumination equipment, and cultivation of mold, bacteria and microorganisms. Accurately simulate climatic conditions in different environments. In computer-aided agricultural production, artificial climate chamber is one of the effective tools for agricultural scientific research. It is a high-precision cold and hot temperature equipment with illumination and humidification function, which provides users with an ideal artificial climate experimental environment, so it is Called the intelligent artificial climate chamber, the intelligent artificial climate chamber is an instrument that simulates the natural environment developed by Top Instruments according to market demand. The artificial climate incubator adopts the FPID control mode to achieve full intelligent control. It can perform hot and cold temperature control, humidification and dehumidification control, illumination control and time control, etc., and realizes automatic control of unmanned operation.
Instructions for using the artificial climate chamber: The artificial climate chamber is converted into an electrical signal by the actual temperature and humidity felt by the temperature sensor and the humidity sensor in the box, and the heating or cooling compressor and the atomizer are controlled by the microcomputer to achieve the required temperature and humidity. The illumination controller controls the amount of light to achieve constant temperature, constant humidity, and illumination tests. Add water: Take out the steam pipe, lift the water tank to disengage it from the base, then invert the water tank, and unscrew the water cover, and add 5L of clean water to the water tank (use pure water or distilled water, tap water and Well water). After adding water, tighten the water cap and check the water cap and spring valve. (The water outlet) is there any dripping. After the zui, the water tank is placed on the bottom cover according to the matching requirements - the water tank and the base should be matched. Connected to the artificial climate box steam circuit: place the humidifier on the right rear side of the artificial climate chamber, the nameplate is on the inside, then insert the steam outlet into the steam production tube, and use the special ф20×1 soft plastic tube to humidify the humidifier. Keep the steam inlet pipe of the steam outlet and the climate chamber at an elevation angle of >3°. Do not hang down or fold the plastic pipe to avoid water and block the steam path. To do this, move the humidifier position and turn the plastic tube out of the steam tube. Electrical connection to the artificial climate chamber: Plug the electric plug of the humidifier into the socket on the lower right side of the artificial climate chamber. The humidifier's power supply is controlled by a climate chamber to ensure that it is humidified.
Artificial climate chamber maintenance:
1. Clean water (distilled water or purified water) below 40 °C should be used. Hard water and dirty water such as tap water should never be used for long-term use.
2. When the water tank is out of the base, the water on the base must be inverted, otherwise it will not produce steam.
3. The water tank cap and spring valve (water outlet) should not leak water to avoid damage to the electrical appliances in the base or cause no steam.
4. The ambient temperature should be between 1 and 45 °C.
5. It should be placed horizontally on the ground, and the plastic hose should not be folded flat or drooping.
6. It needs to be cleaned after using for a period of time, but it is not possible to scratch the transducer with a hard object.
7. Wash, dry and dry before hiding. 8. There is high voltage inside, non-professionals should not open the device in the base at will.
Instructions for using the artificial climate chamber: The artificial climate chamber is converted into an electrical signal by the actual temperature and humidity felt by the temperature sensor and the humidity sensor in the box, and the heating or cooling compressor and the atomizer are controlled by the microcomputer to achieve the required temperature and humidity. The illumination controller controls the amount of light to achieve constant temperature, constant humidity, and illumination tests. Add water: Take out the steam pipe, lift the water tank to disengage it from the base, then invert the water tank, and unscrew the water cover, and add 5L of clean water to the water tank (use pure water or distilled water, tap water and Well water). After adding water, tighten the water cap and check the water cap and spring valve. (The water outlet) is there any dripping. After the zui, the water tank is placed on the bottom cover according to the matching requirements - the water tank and the base should be matched. Connected to the artificial climate box steam circuit: place the humidifier on the right rear side of the artificial climate chamber, the nameplate is on the inside, then insert the steam outlet into the steam production tube, and use the special ф20×1 soft plastic tube to humidify the humidifier. Keep the steam inlet pipe of the steam outlet and the climate chamber at an elevation angle of >3°. Do not hang down or fold the plastic pipe to avoid water and block the steam path. To do this, move the humidifier position and turn the plastic tube out of the steam tube. Electrical connection to the artificial climate chamber: Plug the electric plug of the humidifier into the socket on the lower right side of the artificial climate chamber. The humidifier's power supply is controlled by a climate chamber to ensure that it is humidified.
Artificial climate chamber maintenance:
1. Clean water (distilled water or purified water) below 40 °C should be used. Hard water and dirty water such as tap water should never be used for long-term use.
2. When the water tank is out of the base, the water on the base must be inverted, otherwise it will not produce steam.
3. The water tank cap and spring valve (water outlet) should not leak water to avoid damage to the electrical appliances in the base or cause no steam.
4. The ambient temperature should be between 1 and 45 °C.
5. It should be placed horizontally on the ground, and the plastic hose should not be folded flat or drooping.
6. It needs to be cleaned after using for a period of time, but it is not possible to scratch the transducer with a hard object.
7. Wash, dry and dry before hiding. 8. There is high voltage inside, non-professionals should not open the device in the base at will.
Horse Mackerel,horse mackerel fish,dried horse mackerel,Fresh Horse Mackerel
Zhoushan Boda Aquatic Products Co.,Ltd , https://www.baida-aquatic.com