First, drink about 500 ml of boiled water 2 hours before exercise. This is because supplementing moisture before exercise can improve the body's ability to regulate the heat and reduce the heart rate during exercise. Rehydration 2 hours in advance can give the kidneys enough time to metabolize the body fluids and regulate the osmotic pressure to the optimal state, allowing enough time for the excess water to drain from the body.
Second, during exercise, if it takes more than one hour, you should drink some salt water, add 0.11 to 0.15 grams of salt per liter of water, and control the temperature of the water at 15 to 22 degrees Celsius. When sweating a lot during exercise, sweat contains many ionic components. At this time, drinking boiled water without any ion content will not result in supplemental effects. Light salt water can promptly replenish the lost ions and prevent unpleasant reactions such as blood sodium. Even if you do not feel thirsty, it is best to drink one or two drinks every 20 minutes of exercise to balance the loss of sweat in the body and prevent dehydration from causing damage to the body.
Third, drink electrolyte drinks after exercise, that is, drinks containing sodium, potassium, chlorine, magnesium, calcium, phosphorus and other minerals. Or you can add some sugar in plain water in a ratio of 1:15. The addition of sugar to the water is to maintain a certain blood glucose concentration and delay the occurrence of fatigue so as to ensure the health of the bodybuilder.
Ion Exchange Chromatography Resins
Uni Series Ion Exchange Chromatography Resin
Product Description
UniCM, UniSP, UniQ, UniDEAE, and UniMSP are the components of NanoMicro`s Uni series of ion exchange (IEX) products. They are designed for the IEX purification of small biomolecules and API, such as insulins, peptides, oligonucleotides, and antibiotics. The base beads are mono-disperse highly crosslinked polymethacrylate.
Product Attributes
|
Product Name |
UniCM-30S |
UniCM-50XS |
UniSP-30S |
UniSP-50XS |
UniQ-30S |
UniQ-50XS |
UniDEAE -30S |
UniDEAE -50XS |
UniMSP-30XS |
UniMSP-50XS |
|
Support Matrix |
Mono-disperse Highly Crosslinked Polymethacrylate Bead |
|||||||||
|
Particle Size (µm) |
36 |
55 |
36 |
55 |
36 |
55 |
36 |
55 |
33 |
52 |
|
Pore Size (Ã…) |
500 |
300 |
500 |
300 |
500 |
300 |
500 |
300 |
300 |
300 |
|
IEX Type |
Weak Cation |
Strong Cation |
Strong Anion |
Weak Anion |
Strong Cation /HIC Mixed Mode |
|||||
|
Charged Group |
-CH2COO- |
-(CH2)3SO3- |
-CH2N+(CH3)3 |
-CH2CH2N(CH2CH3)2 |
-(CH2)3SO3- |
|||||
|
Total Ionic Capacity (mmol/ml) |
0.23 |
0.23 |
0.23 |
0.25 |
0.23 |
0.25 |
0.20 |
0.20 |
0.25 |
0.20 |
|
Dynamic Binding Capacity |
60 mg/ml (Lys) |
55 mg/ml (Lys) |
60 mg/ml (Lys) |
55 mg/ml (Lys) |
/ |
/ |
/ |
/ |
70 mg/ml (Lys) |
65 mg/ml (Lys) |
|
Operating Pressure |
< 0.8 MPa |
< 0.5 MPa |
< 0.8 MPa |
< 0.5 MPa |
< 0.8 MPa |
< 0.5 MPa |
< 0.8 MPa |
< 0.5 MPa |
< 0.8 MPa |
< 0.5 MPa |
|
pH Range |
2 - 12 |
2 - 12 |
2 - 12 |
2 - 12 |
2-12 |
|||||
* DBC (10% breakthrough) of CEX resins is measured using 2mg/ml lysozyme in 20mM phosphate pH6.8 equilibration buffer. DBC of AEX resins is quantified using 2mg/ml of BSA in 20mM Tris pH8.0 equilibration buffer.
Related Documents
PDF file of Product Manual of Uni Series IEX Resins
PDF files of related application notes using Uni Series IEX resinsIon Exchange Resins; Insulin Purification; Peptide Purification; Antibiotics Purification
Suzhou Nanomicro Technology Co., Ltd. , https://www.nanomicro-technology.com