Steam trap overview

Steam trap overview
Document.write('') ​​The trap document.write('') ​​is a valve used in steam networks and equipment to automatically discharge condensate, air and other non-condensable gases and block water vapor leakage. Depending on how document.write('') ​​steam trap document.write('') ​​works, document.write('') ​​steam trap document.write('') ​​can be converted into three types: mechanical : Relying on the change of the height of the condensate in the document.write('') ​​steam trap document.write(''), 1. Document.write('') ​​The steam trap document.write('') ​​is installed between the steam heating unit and the condensate return header. When driving, the bucket is at the bottom, and the document.write('') ​​valve document.write('') ​​is fully open. The condensate enters the document.write('') ​​trap document.write('') ​​and flows to the bottom of the bucket, filling the valve body, completely immersing the barrel, and then condensing the water through the full open document.write('') ​​valve document .write('') ​​to the backwater header. 2. Steam also enters the document.write('') ​​trap document.write('') ​​from the bottom of the barrel, occupying the top of the barrel and creating buoyancy. The barrel slowly rises and gradually moves the lever in the direction of the seat until the document.write('') ​​valve.write('') ​​is completely closed. Air and carbon dioxide gas collect through the venting holes in the barrel and gather at the top of the document.write('') ​​trap document.write(''). The vapor exiting the vent will condense due to heat dissipation from the document.write('') ​​trap document.write(''). 3. The barrel begins to exert a pulling force on the lever when the incoming condensate begins to fill the barrel. As the condensate level continues to rise, the resulting force continues to increase until the pressure differential can be overcome, opening the document.write('') ​​valve document.write(''). 4. Document.write('') ​​The valve document.write('') ​​starts to open and the differential pressure acting on the flap is reduced. The barrel will drop rapidly, causing the document.write('') ​​valve document.write('') ​​to be fully open. The non-condensable gas that accumulates at the top of the document.write('') ​​trap document.write('') ​​is discharged first, and then the condensate is drained. The flow of water from the barrel causes the dirt to flow out together with the document.write('') ​​trap document.write(''). While the condensate is draining, the steam begins to re-enter the document.write('') ​​trap document.write(''), and a new cycle begins again.

Milk Booster

Milk Booster,Breast Milk Booster,Milk Booster Supplement,Milk Production Boosters

Tangshan Finely Animal Care Co.,Ltd , https://www.faczyme.com