How to properly maintain and use tractor gearbox

The gearbox is an important part of the tractor. The main cause of the failure is the distortion and wear of the gearbox's main components such as shafts, bearings, gears, forks, locking pins and springs. If the maintenance is not timely or the use of improper operation, such as lube oil surface is too low, the oil is not replaced in time, causing poor lubrication, oil temperature is too high; improper shift operation, so that the gear end surface injuries, resulting in shifting difficulties, etc. , will cause the rapid deterioration of the state of the gearbox technology. Therefore, proper maintenance and operation are the main ways to reduce transmission failures and extend service life. (1) Check the tightening status of the various parts of the transmission regularly and tighten them if necessary. Always check the oil seals and external joints at the shaft end for oil leakage and oil leakage. If necessary, replace the failed oil seal and paper pad and tighten. Screws; regular replacement of new oil, when the change of oil to be hot to release dirty oil, diesel or kerosene, the new oil should meet the requirements. (2) When shifting gears, the steering gear lever can't be used too hard to avoid teething and damage to the components such as the shifting fork; when the clutch is shifted again, the gears may not be damaged; when carrying out the transportation work, the gears may not be shifted, but Proficient in operation, when parking in the field, shift gears. The engagement of the clutch should not be too fast, so as to avoid impact load on the transmission parts, early spalling of the tooth surface, crushing of the transmission spline shaft surface, and even causing the spline shaft to break. It is strictly forbidden to overcome the heavy load or overcome obstacles by slamming the clutch pedal to reduce impact wear on the gear.

Mingtai Comprehensive Operation Table fairily "T" shape base design supple excellent shock resistance and stability, easy for clear and disinfection. 5 sections board design: head board, back board, built-in kidney elevator and leg board

Electric motor driving system:use good quality motor, low noise, smooth table motion. Lifting and rising, forward and backward, left ward and rightward and the back plane are all controlled by system, manual head plate and leg plate, easy and convenient for operate

For more information about Operating Light, Operating Table, Hospital Bed and Medical Pendant please visit website.

Comprehensive Surgical Table

Comprehensive Surgical Table,Universal Operating Table,Electric Comprehensive Operating Table,Comprehensive Operation Table

Shandong Mingtai Medical Equipment Group Co., Ltd , http://www.mingtaic.com