The standard calibration method of the upper quasi-electronic scales (1) on the quasi-electronic scale series SUC
Pressing the single-weight setting for 3 seconds, SUP appears - press 1, the AD value is about 5000, and the number is 0, and 0 is 0. Putting the code; put 1/2 code to press "2" 2 times, put 1/3 to press 3 "3" 2, the whole amount is pressed "1" 2 times.
(2) On the quasi-electronic scales series, the quasi-SUC-3A
According to the fixed number warning, SUC-3. 0 appears, press zero-peeling-quantity setting-single setting, FUN-1 appears, according to the quantity setting, FUN-13 appears, according to the fixed number warning, The number jumps, PASS appears, then press the fixed number setting, the number appears, the grading, the number jumps, PASS, according to the fixed number warning, END appears. (Program change, set by quantity, FUN-9 appears, press peel, convert CAL1-1 and CAL1-3, press the fixed number warning, PASS, then press single reset, return to FUN–13
(3) How to adjust the SUC-1.2K according to the single weight for 3 seconds, press “.†2 times, put the weight code, press the number multiple times twice, and the self-test is completed. (For example, 12kg put the code 6kg according to 2 times Yes)
1. Press “Weight Sort†to start, the electronic scale stops self-test, then enter “return to zero, peel, quantity, single weight†in turn, and the electronic scale displays “the previous English word, what I don’t remember, the back is :1"
2. Press the “Quantity†button to display “...2â€, then press “Weight Sortâ€, then press “Single Weight†to display “F9â€, then press “Weight Sort†to display “cal3â€, press “Go†Change the skin to "1" and confirm by "weight selection".
3. Display “...3†by quantity, press “Weight Sort†to display the weight of the weight. At this time, you can input the value of the weight yourself, according to the weight of your hand, but not more than 1200g (because What you are talking about here is the 1.2kg electronic scale), then press "Weight check" to display the internal code value, then press "Weight check". After a few seconds, the internal code value flashes and put the corresponding weight, then press " Weight selection", the electronic scale shows OK when the weight is weight.
(4) The difference between SUC-60A and SUC-12 is the same. The letter A after this Zui is the counting scale representing 1/30000, SUC-12, no suffix, this is the 1/6000 counting scale SUC-XA Type, X represents the range of the electronic scale (for example: SUC-60A, refers to the 60kg counting scale)
1. In the off state, press and hold the “fixed warning†to start, the electronic scale does not self-test 2. Then enter the password “return to zero, peeling, quantity sampling, single sampling†four keys, the electronic scale weight screen displays “ F1"
3. Press “Single Resampling†to the electronic scale to display “F13â€
4. Press “Digital Warningâ€, the electronic scale displays the weight value, you can use “Tare and Zero†to adjust the value, then press “Fixed Warningâ€, the electronic scale displays the internal code value (20,000~100,000).
5. Press "fixed warning". After a few seconds, the internal code is missing. An English word is displayed. I don't remember. At this time, put the corresponding weight, and then press "fixed warning". After a few seconds, the electronic scale displays the weighing status. And display the weight of the weight on the weighing pan, then click "fixed warning", the electronic scale re-test, the calibration is completed.
The above method is a correction, that is, when "F9" is displayed, press "fixed warning" to change the 3 inside to 1 and then press "fixed warning" and then correct.
The calibration method of the SUC-12 electronic scale:
Turn on the machine first, wait for the self-test to display 0, press and hold the “single weight†button, after three seconds, the single bar will display the internal code value (about 2000-6000), then press the number button 1, the total column will display a 0. Put 12kg weights, and then press the number key 1 twice after the number is stable. The electronic scale re-tests, removes the weight, and the calibration is completed.
On the sub-electronic scale series SUC-W series press and hold unit conversion, start up, SUC-XX appears, press, zero, peel, quantity, sample, quantity, FUN-13, press and hold unit conversion, * segment appears To correct the number of codes, repeat the above steps and the second and third segments are displayed. Press and hold the unit conversion, a set of numbers appears in the flash, after the stabilization, press and hold the unit conversion, etc. will appear PUE. 9E, 1. Put the third code, press and hold the unit to convert, a set of numbers is flashing, and Z is displayed after zui. 000. That is, the weight value. Press and hold the unit conversion, LAFE appears, take the code, repeat the above steps, check the second paragraph code, and check the * paragraph after zui. Press and hold the unit to convert, OK.
Electronic scales (Shanghai electronic scales) floor scales (small scales) special scales (scales)
Large table scale (electronic scale) crane scale (Shanghai crane scale) platform scale (Shanghai platform scale)
Balance scale (each brand balance scale) electronic hook scale (Shanghai hook scale) electronic scale truck scale forklift scale table scale oil drum truck electronic scale explosion-proof electronic scale stainless steel electronic scale
Pressing the single-weight setting for 3 seconds, SUP appears - press 1, the AD value is about 5000, and the number is 0, and 0 is 0. Putting the code; put 1/2 code to press "2" 2 times, put 1/3 to press 3 "3" 2, the whole amount is pressed "1" 2 times.
(2) On the quasi-electronic scales series, the quasi-SUC-3A
According to the fixed number warning, SUC-3. 0 appears, press zero-peeling-quantity setting-single setting, FUN-1 appears, according to the quantity setting, FUN-13 appears, according to the fixed number warning, The number jumps, PASS appears, then press the fixed number setting, the number appears, the grading, the number jumps, PASS, according to the fixed number warning, END appears. (Program change, set by quantity, FUN-9 appears, press peel, convert CAL1-1 and CAL1-3, press the fixed number warning, PASS, then press single reset, return to FUN–13
(3) How to adjust the SUC-1.2K according to the single weight for 3 seconds, press “.†2 times, put the weight code, press the number multiple times twice, and the self-test is completed. (For example, 12kg put the code 6kg according to 2 times Yes)
1. Press “Weight Sort†to start, the electronic scale stops self-test, then enter “return to zero, peel, quantity, single weight†in turn, and the electronic scale displays “the previous English word, what I don’t remember, the back is :1"
2. Press the “Quantity†button to display “...2â€, then press “Weight Sortâ€, then press “Single Weight†to display “F9â€, then press “Weight Sort†to display “cal3â€, press “Go†Change the skin to "1" and confirm by "weight selection".
3. Display “...3†by quantity, press “Weight Sort†to display the weight of the weight. At this time, you can input the value of the weight yourself, according to the weight of your hand, but not more than 1200g (because What you are talking about here is the 1.2kg electronic scale), then press "Weight check" to display the internal code value, then press "Weight check". After a few seconds, the internal code value flashes and put the corresponding weight, then press " Weight selection", the electronic scale shows OK when the weight is weight.
(4) The difference between SUC-60A and SUC-12 is the same. The letter A after this Zui is the counting scale representing 1/30000, SUC-12, no suffix, this is the 1/6000 counting scale SUC-XA Type, X represents the range of the electronic scale (for example: SUC-60A, refers to the 60kg counting scale)
1. In the off state, press and hold the “fixed warning†to start, the electronic scale does not self-test 2. Then enter the password “return to zero, peeling, quantity sampling, single sampling†four keys, the electronic scale weight screen displays “ F1"
3. Press “Single Resampling†to the electronic scale to display “F13â€
4. Press “Digital Warningâ€, the electronic scale displays the weight value, you can use “Tare and Zero†to adjust the value, then press “Fixed Warningâ€, the electronic scale displays the internal code value (20,000~100,000).
5. Press "fixed warning". After a few seconds, the internal code is missing. An English word is displayed. I don't remember. At this time, put the corresponding weight, and then press "fixed warning". After a few seconds, the electronic scale displays the weighing status. And display the weight of the weight on the weighing pan, then click "fixed warning", the electronic scale re-test, the calibration is completed.
The above method is a correction, that is, when "F9" is displayed, press "fixed warning" to change the 3 inside to 1 and then press "fixed warning" and then correct.
The calibration method of the SUC-12 electronic scale:
Turn on the machine first, wait for the self-test to display 0, press and hold the “single weight†button, after three seconds, the single bar will display the internal code value (about 2000-6000), then press the number button 1, the total column will display a 0. Put 12kg weights, and then press the number key 1 twice after the number is stable. The electronic scale re-tests, removes the weight, and the calibration is completed.
On the sub-electronic scale series SUC-W series press and hold unit conversion, start up, SUC-XX appears, press, zero, peel, quantity, sample, quantity, FUN-13, press and hold unit conversion, * segment appears To correct the number of codes, repeat the above steps and the second and third segments are displayed. Press and hold the unit conversion, a set of numbers appears in the flash, after the stabilization, press and hold the unit conversion, etc. will appear PUE. 9E, 1. Put the third code, press and hold the unit to convert, a set of numbers is flashing, and Z is displayed after zui. 000. That is, the weight value. Press and hold the unit conversion, LAFE appears, take the code, repeat the above steps, check the second paragraph code, and check the * paragraph after zui. Press and hold the unit to convert, OK.
Electronic scales (Shanghai electronic scales) floor scales (small scales) special scales (scales)
Large table scale (electronic scale) crane scale (Shanghai crane scale) platform scale (Shanghai platform scale)
Balance scale (each brand balance scale) electronic hook scale (Shanghai hook scale) electronic scale truck scale forklift scale table scale oil drum truck electronic scale explosion-proof electronic scale stainless steel electronic scale
step 1: Remove a test strip, taking care not to touch the reaction fields.
step 2: Immediately close the container again.
This protects the remaining test strips from humidity and guarantees strip integrity up to the expiry date indicated.
step 3: Dip the test strip for about 1 second into the fresh urine specimen.
Wipe off any excess urine on the rim of the vessel and blot the edge of the test strip on tissue paper.
step 4: Read the result by comparing the test fields with the color scale on the test pack after 30 to 60 seconds.
step 2: Immediately close the container again.
This protects the remaining test strips from humidity and guarantees strip integrity up to the expiry date indicated.
step 3: Dip the test strip for about 1 second into the fresh urine specimen.
Wipe off any excess urine on the rim of the vessel and blot the edge of the test strip on tissue paper.
step 4: Read the result by comparing the test fields with the color scale on the test pack after 30 to 60 seconds.
Urine Test Strips 2K,Urinalysis Strips,Best Urine Test Strips,Urine Analysis Strips
Changchun LYZ Technology Co., Ltd , https://www.lyzstrips.com