First, do a good job of disinfection before silkworm rearing
1, disinfection period: about a week before the sericulture.
2, disinfection method:
1 Cleaning and Cleaning: Clean the Jamsil and surrounding environment before disinfection. Rinse the cement surface with water. The mud land should be scraped with a layer of topsoil, replaced with new soil, and the walls should be painted with lime water to remove weeds and clear the trash. Gutters, sewage, silkworms washed with water and dried.
2 Pharmacy Disinfection: The current disinfectants use more chlorine preparations, such as methicillin, bleaching powder, and disinfection net.
Cleaned silkworms were placed in the silkworms and then sterilized. If necessary, the silkworms can be soaked in a pre-prepared 5% lime water tank and soaked for about 30 minutes. Medicinal silkworm indoor spray disinfection. Be sure to spray evenly, be completely moist, and moisturize for more than 30 minutes, avoid direct sunlight, preferably in wet weather or sunny mornings and evenings.
3. Precautions The sterilized silkworm can not be moved to the unsanitized place and allowed to dry naturally.
Second, do a good job of urging youth to make up for what the green done, it is related to the hatching of silkworm eggs. The specific approach is: heating the silkworm room one day before breeding, keeping the temperature at 21°C in the evening, and the difference between wet and dry 2°C. After the silkworms are planted in the silkworm room, the temperature rises gradually from 21°C and rises by 0.5°C-1.0°C per hour, reaching 25.5°C per hour. The difference between dry and wet is about 1.5°C. The silkworms are spread flat and covered with shades. The temperature and humidity are kept steady and attention is paid to ventilation. Heating braziers should be one meter away from the silkworm species.
Third, keep a good small silkworm
1. Small silkworms adapt to the high temperature and humidity environment. Now it is generally used to prevent dry paper breeding, namely, the first and second ages cover the lower mat, and the third age upper cover is the dry paper. The temperature is generally between 25.5°C and 28°C. The difference between dry and wet 0.5 °C.
2. The growth and development of small silkworms are fast, and the quality requirements for mulberry leaves are high. Small silkworm leaves are suitable for ripening leaves, and mulberry leaves are required to be smooth and soft. From the leaf color point of view, one-year-old green with yellow, second-instar green, third-in-dark green; at the same time pay attention, reasonable storage mulberry, keep mulberry leaves fresh.
3, small silkworms sleep fast, sleep time is short, silkworm body is small, inconvenient to operate, and the moving distance of the silkworm children is small, food mulberry time is short, also has the characteristics of phototaxis, strong density, etc., therefore, small silkworm plus sleep network To be early, give the mulberry to be fine, strive for uniformity, expand the seat in a timely manner, and keep the indoor light evenly. The removal of sand from small silkworms is generally not affected by the first instar, except for the second instar (two times of insomnia and one inoculation), and the third instar in addition to three times (in times of sleep, beginning, and middle).
Fourth, large silkworm rearing
1. Large silkworm adapted to low temperature and dry environment. Generally, the suitable temperature for four instars is 24°C-25°C, the wet/dry difference is 2.5°C-3°C, the fifth instar is 23°C-24°C, and the wet/dry difference is 3°C-3.5°C. Try to avoid temperatures below 20°C and temperatures above 30°C. The high temperature.
2. The large amount of mulberry eats in the large mulberry leaves. It is necessary to do a good job in mining, transporting and storing mulberry leaves. Use leaves every day to correctly estimate and prevent excessive or insufficient mulberry leaves. Collect leaf as far as possible to use the first three leaves, branches or branches of the lower part of the foot, to achieve a planned cutting cutting. Transport mulberry leaves should be loosely packed and shipped to prevent wilting and fever.
3, good mulberry satiety, especially in the fifth day after the fifth instar, after the mulberry to do a full mulberry and make up the mulberry work, and with the growth of silkworm eggs to expand the seat, prevent excessive density.
4, strengthen the prevention of disease during the silkworm period. Large silkworms should remove sand regularly and properly deal with the silkworms. It is found that the diseased silkworm is isolated and eliminated in time. The dead silkworm should be placed in a lime-disinfecting tank and burned or buried deeply. Sprinkle lime and anti-pointing powder every morning and evening in the rain. Sunny days only sprinkle lime or anti-static powder every day. However, it should be noted that in the rainy days, there is no need to prevent disease, so as to avoid causing minor poisoning in silkworms and reduce the resistance of silkworms, silkworms are susceptible to disease.
5. Do a good job of sleeping and raise them in batches. When we find that there are sleeping silkworms, we add a sleeping net to remove sand, and then we feed the leaves only after two leaves. Silkworms basically sleep. If there are still some silkworms that can't sleep, we should add a net and keep the untreated silkworms separately. Silkworms feeding should wait until the silkworms are all open and feed the leaves again.
6, to prevent pesticide poisoning, this is the quarterly silkworm should pay attention to things. Silkworm leaves must be tested before the leaves are used, and silkworms can be fed under certain non-toxic conditions.
Anabolic Steroids come in 2 forms: injectables and Orals ( Oils for drinking, Tablets and Capsules are all belongs to Oral products ) Even though almost all Raw Steroids has it`s side effects, comparing to injectables, Oral Anabolic Steroids have more. When speaking of oral steroids one of the most common concerns is liver damage; unlike their injectable cousins, oral steroids are notorious for possessing a toxic liver effect. There are many oral steroids we have to choose from: for bulking purpose, Dianabol Raws and Anadrol Raws are the best options; Anavar Raws and Winstrol Raws are good as cutting cycle for weight loss.
It is also important to keep in mind oral steroids generally carry with them a much shorter half-life than the many injectable steroids; we generally take the orals Every Day, the regular dosage is 10-50mg rarely higher than 100mg even if you`re a advanced bodybuilder cause it`s liver toxic damage and short active life ( from taking oral steroids to pesticide effect disappeared just need a few hours ). In the market most of oral anabolics are come in oral form. there are also anabolic steroids available in both injectable and oral form; most notably anabolic steroids such as Winstrol (water-based are more popular) or Primo(Methenlone Enanthate) are both commonly sold as both an injectable and oral steroids. Among oral steroids, some of them can be used for female bodybuilder as it`s mild traits, even so, we need to control the using dosage within a safe range.
Normally within a cycle no matter it`s for Muscle Gain or Cutting cycle, Oral and Injectables are combined in a full cycle, which can get ideal results. Let`s take an example of Novice Cycles for bulking: 12 weeks Testosterone Cypionate, 10 weeks of Deca Durabolin and Dianabol for 6 weeks, and match with a PCT plan, you can choose HCG at 350IU/ed for 2 weeks and 4 weeks of clomid at 40mg/ed of first 2 weeks and at 20mg/ed of last 2 weeks. It will be a very helpful for Mass Gain.
During many cycles, Human Growth Hormone and Bodybuilding Peptides are often designed into bodybuilders cycle plan. Why should we make a Combination of steroids and HGH and how Maybe the following reasons will give you the answer. Firstly, the synergy effect, or 1 + 1 = 3. Growth Hormone and steroids influence different receptors, thus providing different benefits for muscles. You can get all of them if you take HGH and steroids together. Secondly, HGH and steroids facilitate each other`s side effects. When you take both drugs, you can lower the dosage of each and obtain great results due to the synergy effect. When using HGH, you can consume steroids in a lower dosage, such as 500 mg of testosterone instead of 750 mg. It reduces potential side effects. Besides, growth hormone can help fight acne. So how to combine steroids and HGH? Let`s divide it into 2 parts, bulking and cutting cycle, hgh can serve both purpose, HGH will give you the ability to gain lean muscle mass, while in the second it will accelerate fat loss. Bulking cycle may include strong substances, such as Testosterone Enanthate, Deca, Dbol, or Trenbolone. Test E /500 mg/week + Deca at 500 mg/week + Dbol at 30 mg/EO + HGH (5-7 IUs, you can divide your daily dosage of hgh into 2 injections, inject the first when you wake up and the second 6-8 hrs before retiring to bed ). A cutting cycle includes steroids that burn fat: Winstrol, Anavar, Trenbolone. You also need to increase the dosage of HGH if your cycle is short and you want to burn fat efficiently. Winstrol/Anavar – 50 mg/day + Trenbolon E (200-300 mg/week) + 10-15 IUs of HGH. Currently unfortunately we are unable to provide oral finished products but we carry semi-finished oils for injectables, besides we added Sarms Raws on our list at customer`s request, more new products will come soon thanks for your attention.
Oral Anabolic Steroids
Oral Anabolic Steroids,Dianabol Raws,Anadrol Raws,Anavar Raws
beststeroidraws Co., Ltd , http://www.beststeroidraws.com