After the end of the farming season, the phased tasks of the tiller are completed and will generally be parked for a period of time. During this period, it is not possible to ignore them. We must do a good job of conservation work. The specific work is summarized in the following four points:
(1) The engine runs at low speed for 5 minutes. After stopping, the engine oil is removed and new oil is added.
(2) Remove the fuel filler bolt on the engine cylinder cover and add 1 to 2 oil.
(3) Hold down the engine decompression handle and pull the recoil starter rope 2 or 3 times (but not for the car). Then place the decompression handle back into the compression position and slowly pull the recoil rope until you feel pressure.
(4) Machines should be washed and dried, parked in a dry, safe place.
The above four points are important conditions for ensuring that the tiller can maintain a good operation, and it is necessary to keep in mind! Therefore, the tiller must be properly maintained during the parking period.
This is a visual rehabilitation device. It has the function of history storage. In order to facilitate the use of training again, users can store the training mode. Next time, the training mode only needs to be called. Our products have two dimensional vision tracking and circular vision tracking
Visual Rehabilitation Equipment
Low Vision Devices,Blind Cane,Computers For The Blind,Visual Rehabilitation Equipment
jinan Fangqi Sunshine education consulting CO.,LTD. , https://www.fzrehabmarket.com