1. DT-15P Projection Pest killing lamp pest killing principle: It is an advanced and practical tool for controlling pests by projecting light to attract pests. The lamp utilizes insect pests to have strong phototaxis to light of a specific wavelength, uses a special-range long-life high-efficiency lamp to emit a light source of a specific range of wavelengths to attract pests, adult insects, and lights, and the lamp is equipped with a light penetrating screen to make pests During the flight, the impact screen falls into the reflector and then slides down the reflector into the bottom collecting bucket. This can reduce field pests and eggs, reduce the population of the insect population, reduce pollution to the environment, and reduce the damage to natural enemies of pests. It is safer for humans and animals to help maintain ecological balance. This light has light control, rain control performance, that is automatically turn off the light rain, automatically turn off the lights during the day.
2. Installation methods and precautions: The company is responsible for training. Then the County Plant Protection Station trains village technicians and specific lamp farmers to achieve the structure and performance of everyone's proficient insecticidal lamp. It will be installed, used, and skilled in operation and maintenance. (See the manual for details)
3, the use of methods: DT-15P-type projection type insecticidal lamp to avoid maintenance of the battery as a power source, change the past insecticide lamp wiring, power consumption, simple and efficient. In villages and villages where corn stalks are piled up, a lamp is installed at a distance of 200-240 meters around the stalks. This lamp uses water to kill adult corn borer. Therefore, it is necessary to add water to detergent and detergent during use. The dosage is more than 50% of the normal laundry addition amount. The total amount of water is added near the overflow hole of the bucket. Other matters can be found in the specification.
4. Turn-on time: According to the survey of pupa emergence progress and the measurement of lamp-induced adult growth, when the peak of corn pupa and larvae, and the light-induced adults are at the beginning of the peak period, they start to trap and kill adults. Because the light is automatic, if you manually control the daylight hours from 9:00 pm to the early morning of the next day.
5. Organizational methods: The township government must organize the straws in each village to be stacked in order to keep the lights safe. At the same time, they must take the nets to ensure the effectiveness of control. Each lamp must be implemented to a specific farmer household. Increased storage and charging of lamps must be signed with the farmers.
6. Precautions for safe use: (1) This light is fragile. Care must be taken during installation, use, storage, and transportation. Handle gently and gently to avoid bumping. (2) When using this light in regions where lightning is frequent, lightning protection devices shall be installed to ensure that the light is not struck by lightning. (3) Use and storage should be kept out of reach of children so as not to happen. (4) Do not replace this battery with other batteries. (5) The larvae lamp belongs to a special lamp and cannot be used as an indoor lighting lamp. Otherwise, long-term ultraviolet light emitted by the trap lamp may cause skin damage. (6) During storage, the battery should be charged daily. The battery should not be saturated before it is used, and it should be recharged once every three months. Please refer to the manual for details.
2. Installation methods and precautions: The company is responsible for training. Then the County Plant Protection Station trains village technicians and specific lamp farmers to achieve the structure and performance of everyone's proficient insecticidal lamp. It will be installed, used, and skilled in operation and maintenance. (See the manual for details)
3, the use of methods: DT-15P-type projection type insecticidal lamp to avoid maintenance of the battery as a power source, change the past insecticide lamp wiring, power consumption, simple and efficient. In villages and villages where corn stalks are piled up, a lamp is installed at a distance of 200-240 meters around the stalks. This lamp uses water to kill adult corn borer. Therefore, it is necessary to add water to detergent and detergent during use. The dosage is more than 50% of the normal laundry addition amount. The total amount of water is added near the overflow hole of the bucket. Other matters can be found in the specification.
4. Turn-on time: According to the survey of pupa emergence progress and the measurement of lamp-induced adult growth, when the peak of corn pupa and larvae, and the light-induced adults are at the beginning of the peak period, they start to trap and kill adults. Because the light is automatic, if you manually control the daylight hours from 9:00 pm to the early morning of the next day.
5. Organizational methods: The township government must organize the straws in each village to be stacked in order to keep the lights safe. At the same time, they must take the nets to ensure the effectiveness of control. Each lamp must be implemented to a specific farmer household. Increased storage and charging of lamps must be signed with the farmers.
6. Precautions for safe use: (1) This light is fragile. Care must be taken during installation, use, storage, and transportation. Handle gently and gently to avoid bumping. (2) When using this light in regions where lightning is frequent, lightning protection devices shall be installed to ensure that the light is not struck by lightning. (3) Use and storage should be kept out of reach of children so as not to happen. (4) Do not replace this battery with other batteries. (5) The larvae lamp belongs to a special lamp and cannot be used as an indoor lighting lamp. Otherwise, long-term ultraviolet light emitted by the trap lamp may cause skin damage. (6) During storage, the battery should be charged daily. The battery should not be saturated before it is used, and it should be recharged once every three months. Please refer to the manual for details.
China leading manufacturers and suppliers of Active Pharmaceutical Ingredient, Mupirocin , Mupirocin Calcium, and we specialize in Sodium Fusidate, Fusidic Acid.
Active Pharmaceutical Ingredient, Mupirocin, Mupirocin Calcium, Fusidic Acid, Sodium Fusidate Manufacturer
Fuzhou Contay Biotechnology Co., Ltd , https://www.contaybio.com