2. In the case of chemicals, the powder is used as a wet-laid powder, and after drying, it is used to compress the tablet, and it is also possible to pulverize the block which is agglomerated during storage or agglomerated during chemical processing. It is used industrially to treat confectionery and sugar blends and malt milk, and other industries such as ceramics, plastics and the like into shaped pellets.
3. It is not suitable for semi-solid, fluid, slurry or wear.
The basic characteristics of the swing type pellet machine 1. The machine is strong and powerful, easy to operate, stable in operation, and has a large volume bucket. The rotating drum is made of stainless steel to ensure that the quality of the treated material is clean and does not cause discoloration.
2. The mesh number of the mesh sieve should be self-prepared according to the particle size requirements. Its device is clamped with two steel pipes. It is easy to assemble and disassemble, and it is tightly supported by fine gears, which can be properly adjusted.
Metal Pneumatic Push in Fittings BSPP
Cixi Air-Fluid Company 'BSPP Thread Metal Pneumatic Push in Fittings with below characteristics:
BSPP Thread Introductions : The British Standard Pipe Parallel (BSPP Threads )have the same diameter from end to end ,A parallel thread typically seals with use of an o-ring or Back Washer to seal the fittings ,no use of Anaerobe. The sealing ring (O-ring) can be easily replaced if it is damaged or hard-worn with time. Connection and disconnection of the tube can be repeated and can be performed using one hand , no other tools required .
Thread Connection : Range from BSPP 1/8" to 1/2"
Push-in Connection: Range from Inch Size 5/32" to 1/2" OD & Metric Size 04mm to 16MM
Configurations Includes: Straight , Elbow , Branch Tee ,Run Tee, Long Leg Male Elbow and Speed Control Valve .
Metal Pneumatic Push In Fittings BSPP, Pneumatic Push In Fittings, Metal Pneumatic Fittings
Ningbo Air-Fluid Pneumatic Components Co., Ltd , https://www.air-fittings.com