1. The separator cannot be started when the locking ring is not locked and the inlet and outlet devices and other fastener screws are not tightened.
2. When the drum is not completely stopped, do not loosen any fastener screws of the separator.
3. If there is abnormal noise and vibration during operation, stop immediately and cut off the power supply to check the cause.
4. It is strictly forbidden to use flame to heat or repair the main parts of the drum, especially the drum body, drum cover and locking ring. (If the drum needs repair, please contact the manufacturer immediately and be repaired by the manufacturer. To avoid a safety incident).
5. Drum parts cannot be exchanged with other machine drum parts, and parts of the same type of machine are not interchangeable.
6. The separator cannot work under overspeed and overload conditions.
7. When there are parts in the drum parts to be replaced, please use the spare parts and spare parts provided by the original manufacturer, and re-balance the machine.
8. Do not use a machine to separate materials that are more corrosive, higher density, and have different solid characteristics than the specified material, if necessary, with the manufacturer.
9. In special industries, the corrosion and abrasion damage of the drum parts should be checked every 2-3 months, especially the drum slag discharge port, lock ring thread, etc. If necessary, the manufacturer should.
2. When the drum is not completely stopped, do not loosen any fastener screws of the separator.
3. If there is abnormal noise and vibration during operation, stop immediately and cut off the power supply to check the cause.
4. It is strictly forbidden to use flame to heat or repair the main parts of the drum, especially the drum body, drum cover and locking ring. (If the drum needs repair, please contact the manufacturer immediately and be repaired by the manufacturer. To avoid a safety incident).
5. Drum parts cannot be exchanged with other machine drum parts, and parts of the same type of machine are not interchangeable.
6. The separator cannot work under overspeed and overload conditions.
7. When there are parts in the drum parts to be replaced, please use the spare parts and spare parts provided by the original manufacturer, and re-balance the machine.
8. Do not use a machine to separate materials that are more corrosive, higher density, and have different solid characteristics than the specified material, if necessary, with the manufacturer.
9. In special industries, the corrosion and abrasion damage of the drum parts should be checked every 2-3 months, especially the drum slag discharge port, lock ring thread, etc. If necessary, the manufacturer should.
Square Plansifter,High Square Plansifter,Wheat Flour High Square Plansifter,Flour Grading Equipment
HEBEI PINGLE FLOUR MACHINERY GROUP CO., LTD , https://www.plrollermill.com