The pepper cutting machine has a reasonable structure, and the automatic cutting of the pepper section is easy to operate. The dry pepper dicing machine is simple to adjust and easy to maintain. The price of the dry pepper cutting machine is low, and the whole body is closed to reduce dust and sanitation in the site and in the air. The magnetic material selection device easily selects the iron filings and iron powder mixed into the material, which improves the service life of the hob. The equipment for cutting the dried chili machine is operated by two people. The automatic cutting of the chili machine is convenient and quick, and the pepper segment can be cut and the pepper circle can be cut. The size of the pepper and the cut pepper is customized by the customer. It is the most professional equipment for cutting the domestic pepper.
The small pepper cutting machine mainly consists of a rack, a conveyor belt, a pressing belt and a tower wheel speed regulating mechanism. The length of the cut pepper is arbitrarily adjusted within a certain range by the "adjustable eccentric wheel". Because of the principle of manual cutting of peppers by the vertical knife, the surface of the cut pepper is smooth and shaped.
Product Usage
The pepper cut video is automatically cut into the round knife set by two conveyor belts. The longest material size is 500mm. The length of the cut section can be customized according to user requirements.
The commercial small-sized pepper cutting machine has a large output and easy operation, and can also be equipped with a hoist to automatically feed and save labor. The machine body is made of all stainless steel materials, with fewer failures, convenient maintenance, long service life and sanitary requirements.
Product safety operation
1 Place the machine in a level working place to ensure that the machine is placed smoothly and reliably.
2 Check all parts before use, whether the fasteners are loose during transportation, whether the switch and power cord are damaged due to transportation, and take corresponding measures in time.
3 Check if there is any foreign matter in the rotating barrel or on the conveyor belt. If there is foreign matter, it must be cleaned to avoid damage to the tool.
4 Make sure that the power supply voltage matches the rated voltage of the unit. Grounded in the field, the mark is reliably grounded, the power cord is extended to find a professional electrician to connect the machine power cord to the all-pole disconnected large open distance power supply, turn on the power, press the "on" button to check the steering, v-belt The steering of the wheel is consistent with the indication. Otherwise, turn off the power and adjust the wiring.
Huayi Foodstuff Co., Ltd. , http://www.ln-foods.com