High pressure fan, annular high pressure fan. The NSK/SKF bearing of the high-pressure blower is more outstanding in steel, and is more suitable for long-term non-stop operation. One machine is used in two machines. The optimal angle of the industrial high-pressure fan is designed to make our air volume larger and wind pressure. Higher; Taiwan's high-pressure blower humanized independent fan blade, allowing you to avoid direct damage to the bearing even when directly extracting waste.
The high-pressure blower adopts German air-return technology, which can run freely even if the wind is squeezed. It completely meets the situation that the wind pressure is small when the wind is running. The unique air inlet silencer cotton design makes our fan run quieter!
The industrial high-pressure fan's excellent computer dynamic balance correction system allows our fan impeller to operate freely even at 4000 rpm; special thermal insulation device, motor extended shaft with high temperature resistance, let our fan withstand temperature jump to 200 degrees;
Taiwan high-pressure blowers For customers with explosion-proof requirements, we can also meet your requirements. We have equipped you with professional explosion-proof motors to make it easy for you to deal with high-risk occasions. Professional centrifugal high-pressure fans We look forward to establishing long-term and friendly with our customers. A win-win partnership and dedication to provide customers with the best service and the highest quality products.
Ring high pressure fan features: high pressure, high air volume, low noise, light weight; aluminum alloy material, greatly reduced weight, to achieve the purpose of lightweight; motor for IEC design, fully closed outer fan type aluminum frame motor, special shaft design, Suitable for long-term use;
Precautions:
Overloading occurs when fully closed (RB series).
Overloading occurs when fully open (CX, TB, HTB, CS, PF, MS series). At this time, the current meter is used to confirm the current magnitude and buffer adjustment. It is usually used in the constant current.
Switching on and off repeatedly within one minute will cause the motor to overheat and should be avoided.
Inverter Control - When the inverter is used, the power waveform is distorted, the motor sound is loud, and the vibration is large. If the inverter is running and the temperature rises or the vibration is high, stop the operation. Generally, please use under the following conditions.
The maximum cycle value (number of revolutions) - must be within the number of cycles specified on the mark and within the set current.
The minimum number of cycles (number of revolutions) - above 30 Hz (Hz), and within the set current.
Derma Roller,Micro Needle,Derma Care Facial Kit
Handsome Beauty Product Co., Limited , http://www.chinabeautyproduct.com