BSC Rice Hull Fuel Molding Machine and Its Use Technology

BSC rice husk fuel molding machine is the latest equipment developed by our factory using waste rice husks as raw materials, and after drying and strongly extruding to form fuel rods, the fuel rods are hexagonal cylinders with holes in the middle, 6 cm in diameter and 40 in length. It can be arbitrarily broken in centimeters and the fuel rod can be directly burned. It can be used in various purposes such as industrial boilers and living heating. It can replace the good coal. The tested fuel rods have high density, low ash content, fast ignition, and low sulfur content. Less smoke, heat value up to 4500-5000 calories, and low cost. Equipment features: low cost, simple operation. Benefit: Making fuel rods from rice husks, achieving rice husks turning waste into treasure, saving coal resources, saving processing costs for rice husks, providing re-employment for laid-off workers, ie protecting the environment and receiving The considerable economic benefits can be described as both economic and social benefits. Production process: Rice husk drying -> molding -> finished fuel rod storage need to explain several issues 1, the fuel rod burning time is short? Because the density of the fuel rods is large and the combustion is complete, it takes longer to burn than the corresponding coal. 2. Does using rice husk burning sticks require special stoves? The rice husk fuel rod can be arbitrarily broken. The shape of the fuel rod also determines that it is suitable for any stove. These include large industrial boilers. 3, there is no flame when burning? With its own vertical furnace, the flame can reach 1.3 meters or more. 4. Did you add chemical ingredients to the production process? Only rice husk is a raw material without any additives. 5. How much factory production is needed? The production of fuel rods of 1.04 tons or less per hour requires a site of 70-100 square meters, and does not require a very regular factory, as long as it does not leak rain. 6. How many fuel rods can a ton of rice husk produce? More than 900 kilograms can be produced. 7. How much is the fuel rod sold? The cost of fuel rods is close to 80 yuan a ton, which can replace coal, so the sales should be based on the price of coal in the region.

Pain Relief Patch For Neck Shoulder,Lower Back And Leg

Pain Relief Patch for neck shoulder, lower back and leg.
[Name] Medical Cold Patch
[Package Dimension] 10cmÃ—12cm 2pieces/box
The pain relief patch is composed of three layers, namely, backing lining, middle gel and protective film. It is free from pharmacological, immunological or metabolic ingredients.
[Scope of Application] For cold physiotherapy, closed soft tissue only.
[Indications]
The patches give fast acting pain relief for strains, sprains, cramp, bruises, swollen areas or joint stiffness.
[How To Use a Patch]
Tear off the packaging bag and remove the patch. Remove the protective film and apply the patch on the skin. One piece, one time. The curing effect of each piece can last for 8-12 hours.
[Attention]
Do not apply the patch on the problematic skin, such as wounds, eczema, dermatitis,or in the eyes. People allergic to herbs and the pregnant are advised not to use the medication. If swelling or irritation occurs, please stop using and if any of these effects persist or worsen.notify your doctor or pharmacist promptly. Children using the patch must be supervised by adults.
[Storage Conditions]
Store below 30c in a dry place away from heat and direct sunlight.

Pain Relief Patch,Pain Relief Pad,Pain Relief Plaster,Neck Pain Relief Patch,Back Pain Relief Pacth

Shandong XiJieYiTong International Trade Co.,Ltd. , https://www.sdxjmedical.com