Rotary furnace , also known as hot air rotary furnace, refers to a kind of heating furnace that uses a variety of different energy sources to feed hot air into the furnace through heat exchangers and fans, and then to bake the contents of the furnace. The rotary furnace body is mainly composed of a furnace shell, spokes, rails, rollers, gear transmissions, a central base and a power part. The center frame is a key component of the rotating furnace body, which is located at the center of the bottom of the rotating furnace body. When the furnace body rotates, it rotates around the center frame. The center frame is composed of a rotating shaft, a bearing, a bearing end cover and a bearing base; The bottom of the outer edge of the shell is a pin gear structure, which is composed of an upper disc, a lower disc and a pin shaft. The upper and lower discs are uniformly drilled with circular holes of the same size and number, and the upper and lower circular holes are respectively formed by the pin shaft. Pin gear; the bottom of the furnace shell is welded with spokes, the spokes are radiated from the center of the bottom of the furnace shell, and the rails are welded to the bottom of the spokes with a ring structure of a certain size, the rails are directly located on the rollers; the rollers are directly mounted by the profiles to form the roller frames On the base; the center frame and the base support the weight of the rotating furnace body. When the furnace shell rotates, the power source connecting gear and the outer edge of the bottom of the furnace shell form a gear transmission. When the power source drives the gear to rotate, the furnace shell rotates at the center base.
Things to be aware of when using a rotary furnace :
1. Before using the gas roast duck oven, the heart must be equipped with a smoking tube and the attached smoking tube should be led outside.
2, the gas tank used must be equipped with a household pressure reducing valve, and no gas leakage at each joint.
3, the gas tank is not allowed to contact the heat source to bake, and it is not allowed to store dangerous goods to avoid explosion.
4. During the operation of the rotary furnace, the operator is not allowed to stay away from the gas roast duck oven. If the combustion gas in the furnace is turned off, the ignition switch should be turned off immediately, the gas source valve should be closed, the cause should be removed, and the gas smell in the furnace should be exhausted. Re-ignite.
5. When using this equipment, be sure to connect the safety maintenance grounding wire.
6, the room used in the gas rotary furnace, the ventilation is very good.
7. It is strictly forbidden to leak and use illegally.
Things to be aware of when using a rotary furnace :
1. Before using the gas roast duck oven, the heart must be equipped with a smoking tube and the attached smoking tube should be led outside.
2, the gas tank used must be equipped with a household pressure reducing valve, and no gas leakage at each joint.
3, the gas tank is not allowed to contact the heat source to bake, and it is not allowed to store dangerous goods to avoid explosion.
4. During the operation of the rotary furnace, the operator is not allowed to stay away from the gas roast duck oven. If the combustion gas in the furnace is turned off, the ignition switch should be turned off immediately, the gas source valve should be closed, the cause should be removed, and the gas smell in the furnace should be exhausted. Re-ignite.
5. When using this equipment, be sure to connect the safety maintenance grounding wire.
6, the room used in the gas rotary furnace, the ventilation is very good.
7. It is strictly forbidden to leak and use illegally.
Frozen Pud Red Shrimp,Red Shrimp,Frozen Shrimp,Melantho Shrimp
Zhoushan Haiwang Seafood Co., Ltd. , https://www.haiwangseafoods.com